120 Photoshop tips, tricks and fixes

Improve your skills and speed up your workflow with these great Photoshop tips.

Photoshop is an easy tool to use and a difficult one to master, but help is at hand with our comprehensive list of tips, tricks and fixes for Adobe's showpiece software. Whether you're looking for tips on using layers, advice on mastering the pen tool, a guide to using RAW, or ways to improve your brush work, it's all here!

Most of these tips were originally published in Practical Photoshop magazine – now part of Digital Camera World. If you're a photographer, we recommend making DCW a rest stop on your travels around the web!

Here are the best Photoshop tips, whether you are using an older CS version or the very latest Creative Cloud software. We've grouped them by category to make it easier for you to find the stuff that's the most relevant to your work right now, but be sure to check them all!

Let's get started…

Quick Photoshop tips

01. Easier marquee selections

Hold down Alt to start a selection at the centre point with any Marquee tool, and then hold Space to temporarily move the selection around.

02. Undo, undo, undo

You probably know that Cmd/Ctrl+Z is Undo, but you may not knowCmd/Ctrl+Alt+Z lets you undo more than one history state.

03. 1000 history states

Go to Edit>Preferences>Performance to change the number of History states up to a maximum of 1000. Beware though of the effect that this has on performance.

04. Cycle blend modes

Shift + or – will cycle through different layer Blend Modes, so long as you don't have a tool that uses Blend Mode options settings.

05. Rotating patterns

 Photoshop tips: Rotating Patterns

You can make amazing kaleidoscopic patterns with the help of a keyboard shortcut. Cmd/Ctrl+Shift+Alt+T lets you duplicate a layer and repeat a transformation in one go. To demonstrate, we've made a narrow glowing shape by squeezing a lens flare effect, but you can use any shape, image or effect you like. First, make an initial rotation by pressing Cmd/Ctrl+T and turning slightly, then hit Enter to apply. Next, press Cmd/Ctrl+Shift+Alt+T repeatedly to create a pattern.

06. Combine images with text


Photoshop tips: Combining images with text

There's a really easy way to overlay an image on top of text. Drop an image layer over a type layer then hold down Alt and click the line between the two layers in the Layers Panel to clip the image to the text.

07. Bird's eye view

When zoomed in close, hold down H and drag in the image to instantly dart out to full screen then jump back to another area. One of the best Photoshop tips for viewing work!

08. Funky backgrounds


 Photoshop tips: Funky backgrounds

Want to change the default grey background to something more funky? Shift–click over the background area with the Paint Bucket tool to fill it with your foreground colour. Right-click it to go back to grey.

09. Close all images

To close all of your documents at the same time, Shift-click any image window's close icon.

10. Spring-loaded move

While using any tool, hold Cmd/Ctrl to temporarily switch to the Move tool. Release to go back to your original tool. Note that spring-loaded keyboard shortcuts work for other tool shortcuts, too.

11. Interactive zoom

For interactive zooming, hold Cmd/Ctrl+Space then drag right to zoom in, or left to zoom out. The zoom targets where your mouse icon is, so it's one of the quickest ways to navigate around an image.

12. Diffuse effects


 Photoshop tips: Diffuse effects

The Diffuse Glow filter can give highlights a soft ethereal feel, especially when you combine the effect with desaturation. Hit D to reset colours then go toFilter>Distort> Diffuse Glow. Keep the effect fairly subtle, then go toImage>Adjustments>Hue/ Saturation and drop the saturation down to complete the dreamlike effect.

13. Step by step: select sky with channels

A: Copy Blue Channel 

 Photoshop tips: Copy Blue channel

Go to Window Channel then drag the Blue Channel to the New Channel icon to duplicate it. Hit Cmd/Ctrl+L to access Levels, then drag the white and black point sliders in dramatically to make the sky totally white and the land black. Now use the Brush tool and paint with black to tidy any bits in the land.

B: Load a selection


 Photoshop tips: Load a selection

Hold Cmd/Ctrl and click the Blue Copy Channel to load a selection of the white areas. Click back on the RGB Channel then go to the Layers Panel and add a Curves Adjustment Layer. The selection is automatically turned into a mask. Drag down on the curve to darken the sky.

Next page: Essential Photoshop shortcuts

 Page 2

Essential Photoshop shortcuts

Mastering these shortcuts will help you work smarter, save time, and graduate to true Photoshop guru level! (These are tips 14–42.)

  • Cmd/Ctrl+Shift+Alt+E will merge a copy of all Layers
  • F Cycle through workspace backgrounds
  • X Change your foreground and background colours
  • D Reset foreground and background colours to black and white
  • and Change your brush tip size
  • Cmd/Ctrl+J Duplicate a layer or selection
  • Space Bar Hold Space and drag to navigate around the image
  • TAB Hides or shows all panels and tools
  • Cmd/Ctrl+T Transform a layer
  • Cmd/Ctrl+E Merge selected layer down, or merges several highlighted layers
  • Cmd/Ctrl/Ctrl+Shift+Opt+S Save for web & devices
  • Cmd/Ctrl+L Bring up levels box
  • Cmd/Ctrl+T Open Free Transform tool
  • Cmd/Ctrl+M Open Curves
  • Cmd/Ctrl+B Edit Colour Balance
  • Cmd/Ctrl+Shift+Opt+C Scale your image to your preferred state
  • Cmd/Ctrl+Opt+G Create clipping mask
  • Cmd/Ctrl+0 Fit on screen
  • Cmd/Ctrl+Shift+>/< Increase/decrease size of selected text by 2pts
  • Cmd/Ctrl+Option+Shift->/< Increase/decrease size of selected text by 10pts
  • ]/[ Increase/decrease brush size
  • Shift+F5 Fill the selection
  • }/{ Increase/decrease brush hardness
  • ,/. previous/next brush
  • </> First/last brush
  • Cmd/Ctrl+] Bring layers forward
  • Cmd/Ctrl+[ Send layer back
  • Cmd/Ctrl+Shift+[ Send layer to bottom of stack
  • Cmd/Ctrl+Shift+] Bring layer to bottom of stack

Next page: Tips for working with Layers

Page 3

Layers tips

43. Converting layer styles

Converting a Layer Style to a normal pixel-based layer gives you greater control to edit the contents. To do so, add a style then right-click Effects and choose Create Layer.

44. View one layer

If you're working with multiple layers and you want to view one layer on its own, there's no need to hide all the others manually, simply hold down Alt and click the Eye icon of a layer to make every other layer invisible. Hold down Alt and click again to reveal them.

45. Invert a layer mask

After adding any Adjustment Layer, hit Cmd/Ctrl+I to invert the Layer Mask and quickly hide the effect, then paint back over the image with white to selectively reveal the adjustment.

46. Unlink layers and masks

You can move either a mask or an image independently of one another by clicking the link between the two thumbnails in the Layers Panel. Highlight the thumbnail you want to reposition, then grab the Move tool.

47. Quick copy

Hold down Alt and drag a mask, style or layer to
quickly duplicate it.

48. Convert the background

Double-click the Background Layer and hit OK to convert it to an editable layer

49. Adjustments

Always use Adjustment Layers rather than directly editing a layer. This gives you three advantages: you can edit it at any time, control the strength with Opacity, and use a mask to make it work selectively.

50. Move query

When using the Move tool, right-click over a point in the image for a list of all the layers you're hovering over.

51. Panel Options

The Layers Panel is the most important box in Photoshop, so you'll want to make sure it's set up properly for your needs. Choose Panel Options from the Fly-out menu to select different thumbnail sizes and content.

52. Move layers up or down

You can move layers up or down the stack in the Layers Panel while watching the image change. Hold down Cmd/Ctrl and press ] or [. Add in Shift to move a layer right to the top or bottom.

53. Fill shortcuts

You can press Alt+Backspace to fill a layer or
selection with the Foreground colour, Cmd/Ctrl+Backspace to fill a layer or selection with the Background colour, or Shift+Backspace to quickly access the Fill Options.

54. The 50% grey layer

A new layer filled with 50% grey is useful in lots of situations. For example, you can dodge and burn with it, add texture, or manipulate a Lens Flare effect, all in a completely non-destructive way. To create a 50% grey layer, make a new layer then go to Edit>Fill, then set the Blend Mode to Overlay.

55. Layer group shortcut

Layer Groups are incredibly useful, but don't bother clicking on the Layer Group icon, as you'll have to add layers to the new group manually. Instead, you should highlight several layers and either drag them to this icon or alternatively hit Cmd/Ctrl+G.

56. Edit multiple type layers

Photoshop tips: Edit multiple type layers

To apply a change of font or size to multiple type layers at once, hold down Cmd/ Ctrl and click the layers in the Layers Panel to highlight them, then simply select the Type tool and change the settings in the Options Bar.

57. Layer mask views

Photoshop tips: Layer mask views

Hold down Alt and click a Layer Mask thumbnail to toggle between a view of the mask and the image. Hold down Shift and click to turn the mask on or off.

58. Quick full layer masks

You can Alt-click on the Layer Mask icon to add a full mask that hides everything on the layer.

59. Lightning fast layer copies

Hold down Cmd+Alt and drag any layer to instantly make a copy.

60. Colour code layers

Use colour coding to organise your Layers Panel. Right-click over a layer's eye icon to quickly access 8 colour code choices.

61. Select similar layers

To quickly select all layers of a similar kind, such as shape or type
layers, highlight one of them and then go to Select>Similar Layers.

62. Change opacity

When not using a painting tool, you can change layer Opacity
simply by pressing a number key. Hit 1 for 10%, 5 for 50%, and 0 for 100%.

63. Quick masking

You may be familiar with Color Range in the Select drop-down menu. But did you know that you can access a similar command through the Color Range button in the Masks Panel? (Window>Masks). This allows you to quickly make a mask by sampling colours, which can be used for making a quick spot colour effect.

64. Step by step: blend fire effects

A: Copy in the fire

Photoshop tips: Copy in the fire

Open a portrait image and a generic fire image, then grab the Move tool and check Auto-Select Layer and Show Transform Controls. Drag the fire image into the girl image to copy it in, then change the Blend Mode of the layer toScreen.

B: Position and warp

Photoshop tips: Position and warp

Click the bounding box to transform the fire layer, then resize, rotate and position the layer. Right-click while in Transform mode and choose Warp to wrap the fire around the body. Hit Cmd/Ctrl+J to copy the fire layer and transform again to build up the effect.

Next page: Tips for mastering Photoshop's tools

Page 4

Tool tips

65. Right-click for contextual menus

Almost all tools have a contextual menu that's accessed with a simple right-click. This usually gives you the tool's major controls and a few handy shortcuts. As well as the tool you have active, where you right-click affects the menu, too. For example, a right-click over a layer thumbnail or mask thumbnail gives different options.

66. Speedy navigation

Being able to quickly and easily move around your image and
zoom in or out will speed up your workflow more than anything else. UseCmd/Ctrl and to zoom in, Cmd/Ctrl and  to zoom out. Hold the space bar to temporarily access the Hand tool and drag around the image.

67. Crucial selection shortcuts

With any selection tool, hold Shift to add to an existing selection and Alt to subtract from it. Shift+Alt together allows you to intersect selections.

68. Fixed ratio selections

The Rectangular Marquee tool has a useful 'Style' setting in the Options Bar that lets you make a selection at a fixed ratio or size. This is helpful if you want to select a specific area to use as a wallpaper or for web pages.

69. Transform a selection

You can transform a selection in just the same way as a layer. Just go toSelect>Transform SelectionRight-click to choose from familiar transform modes like Skew and Warp.

70. Paste in place

Cut and paste a selection to a new layer and Photoshop will place it in the middle of the screen. If you want to paste it to a new layer, but keep the position the same, use Cmd/Ctrl+X to cut and Cmd/Ctrl+Shift+V to paste in place. Similarly, you should hold down Shift while dragging layers between documents with the Move tool to keep the same position.

71. Hide the marching ants

Press Cmd/Ctrl+H to hide or reveal a selection's 'marching ants' line.Cmd/Ctrl+Shift+H does the same for a Path line.

72. The amazing cmd/ctrl+click

Use the Cmd/Ctrl+click shortcut on any layer thumbnail, mask thumbnail, Channel or Path to load its shape or contents as a selection.

73. Switch lasso

When using the Lasso tool, hold Alt then release the mouse
button to temporarily switch to the Polygonal Lasso tool.

74. Pen tool rubber band

If you're new to the Pen Tool, this is one of the best Photoshop tips out there! As a new user it can be frustrating when plotting anchor points, as often you're not entirely sure how your next curve will behave. There's a useful feature hidden in the Options Bar that can be a godsend for beginners. Click the 'Geometry options' drop-down (next to Auto Add/Delete) and check Rubber Band. Now, as you use the Pen tool you'll see an interactive preview of your next curve before you add it.

75. Non-destructive crops

Photoshop tips: Non-destructive crops

A little-known feature of the Crop tool allows you to hide, rather than delete cropped areas. To do this, you'll need to make the Background Layer editable first, so double-click it then hit OK. Next, grab the Crop tool and drag a crop window, then instead of applying the crop, check Hide in the Options. Now you can re-crop at any time by dragging outside the window to reveal the previously cropped areas.

Next page: Tips to help you master the Pen tool

Page 5

Pen tool tips

76. Tweak anchor points

When using the Pen tool, hold down Cmd/Ctrl to temporarily switch to theDirect Selection tool. This lets you move anchor points and control handles.

77. Add a point

To add a point, hover over the existing path line and the Pen tool will automatically change to the Add Anchor Point tool.

78. Remove handles

Remove handles from a point and make it into a sharp angle by Alt-clicking over it.

79. From selection to path

Turn any active selection into a path by clicking the 'Make Workpath from Selection' icon at the bottom of the Paths Panel.

80. Add handles

Add handles to a point by holding Alt then dragging outwards from the point.

81. Path options

Once you've made a path with the Pen tool, right-click for lots of options, including Make Selection, Fill Path and Stroke Path.

82. Magnetic pen

For a magnetic Pen tool that behaves just like the Magnetic Lasso tool, choose the Freeform Pen tool from the Tools Panel then check 'Magnetic' in the Options Bar.

Next page: Brush and painting tips

Page 6

Brush and painting tips

83. Try Adobe Eazel

For tablet owners, Adobe Eazel is both fun and a serious painting tool. Finger-painted brush strokes have a fluidity that's difficult to create on a computer. Wireless transmission between tablet and Photoshop streamlines the painting process.

84. Change the brush angle

When using a non-circular brush, you may find the need to change the angle of the brush tip. To do this, click the Brush Panel in the Options Bar then highlight Brush Tip shape and drag the circle to change the angle of the brush. You can also flip it horizontally or vertically with the check boxes.

85. Rotate the clone source

Clone around corners by rotating a clone source. To do so, use Shift+Alt+ < or >. It helps if you have Show Overlay checked in the Clone Source Panel, so that you can see the rotation.

86. Real paint ridges

The Bevel and Emboss filter is often used by digital painters to make brush strokes look like ridged layers of paint. Merge a copy of all the layers, then set the Blend Mode to Overlay and apply the Bevel and Emboss filter.

87. Interactive brush settings

When using the Brush tool, hold down Alt and the right mouse button for a preview of the Brush tip's size and hardness. Drag down and up to increase or decrease hardness, and drag right or left to change the size.

88. Tilt canvas

Photoshop tips: Tilt Canvas

Photoshop tips don't just come in the form of shortcuts. When painting, it's often easier to rotate the canvas rather than try to bend your wrist into an uncomfortable position. Just as a sketcher would angle a piece of paper, you can angle your canvas by holding down R then dragging it around. Release R and you'll flip back to your original tool. To revert back to normal, hold down R and click Reset View in the options.

89. Smudge painting

Smudge painting is quick and immensely satisfying. To paint with the
Smudge tool, fill a layer with an off-white tone, duplicate the Background Layer and set it at the top of the stack, with Opacity at about 13%, then highlight the Smudge tool, check Sample All Layers, and start painting. It's that simple.

90. Add texture to paintings

Photoshop tips: Add texture to paintings

As a finishing touch, you can make your paintings look much more authentic by adding a paper texture. Copy a texture on top of your image, then experiment with Blend Modes and Opacity until you get the right effect. The Darken or Multiply modes will usually provide you with good results.

91. Create a brush

You can create a brush tip from any image you like. Simply convert to monochrome, then make a selection and go to Edit>Define Brush Preset. Only dark parts are recorded; any parts that are pure white aren't included in the brush tip. So if you want the shape of the brush to be clear, you need to isolate the object or shape against a white background.

92. Make sketch lines

Photoshop tips: Make sketch lines

If you want to turn a photo into a painting, adding sketch lines can make the effect look more realistic. To do so, duplicate your layer then go toFilter>Stylise>Glowing Edges, then invert the colours, desaturate and use the Darken or Multiply Blend Mode.

93. Experiment

Photoshop tips: Experiment!

The Brush Panel is the control centre for hundreds, if not thousands, of different brush effects and settings. The best way to find out how it works is to grab the Brush tool, choose a colour, open a new document and start painting. You can take this further by trying painting on different layers and using different Blend Modes, or adding Layer Style effects to your painted layer.

94. Step by step: quick brush effects

A: Set up the Brush

Photoshop tips: Set up the brush

Load up a generic portrait image and then load the Square Brushes from the Brush Picker drop-down menu.

Select a square brush, then open the Brush Panel and use these settings: Brush tip shape: Spacing 631%. Shape Dynamics: Size, Angle, Roundness Jitter – all 100%. Scattering: Scatter 638%, Count Jitter 50%. Colour Dynamics: Foreground/ Background Jitter 20%, Saturation Jitter 20%. Brightness 30%.

B: Paint mask and colours

Photoshop tips: Paint mask and colours

Use the Lasso tool to select the girl then hit Shift+Backspace and choose Fill: Content-Aware. Hold down Alt and click the Add Layer Mask icon then set Foreground colour to white and paint on the mask over the girl to hide parts of the body. Next, add a new empty layer and hold down Alt to sample colours from the girl, then paint to add coloured fragments. Add a second new layer, paint larger strokes, then blur slightly with Filter>Gaussian Blur.

Next page: Get precise with colour and lines

Page 7

Precise colour and lines

95. Draw straight lines

To draw a straight line with the Brush tool, hold down Shift and then click two points.

96. Sample a colour

With the Brush tool selected, hold down Alt and click to sample a
colour and then set it as your Foreground colour.

97. Precise painting

Press Caps Lock to switch your cursor to a crosshair.

98. Cycle through the brushes

Use , and . to cycle left or right through the brushes in the Brush Preset Picker.

99. Dodge or burn

When painting with the Burn tool, you can hold down Alt to switch
instantly to the Dodge tool.

100. Get a pen and tablet

If you're into digital painting, but don't own a graphics tablet, you're missing out on a whole new world of creativity. There are plenty of good, entry-level tablets available, but if you want mid-range features that include multi-touch input, treat yourself to a Wacom Intuos 5.

101. Change hardness

As you probably know, the ] and bracket keys change your brush size, but you can also use Shift+ ] or [ to change the brush hardness.

102. Quick opacity change

When using the Brush tool, press any number between 0 and 9 and the Brush Opacity will set to it. 1 for 10%, 9 for 90%, 0 for 100%. Press Shift and a number to adjust Flow.

Next page: Do more with Adobe Camera Raw and Bridge

Page 8

Adobe Camera Raw and Bridge tricks

103. Use select all

Photoshop tips: Use select all

The following Photoshops tips focus on Camera Raw. To quickly batch process a group of images, open them all in ACR (the easiest way to do this is through Adobe Bridge) and then click Select All. Now, any changes you make to one image will be applied to all the open files.

104. Open smart objects

Hold down Shift in ACR and the Open Image button switches to Open Object. Now the file opens as a Smart Object, which means you can double-click the layer thumbnail in Photoshop to go back and edit the layer in ACR.

105. Mask sharpening

Photoshop tips: Mask sharpening

The Masking slider in the Detail Panel lets you control which areas of an image are sharpened, but it's impossible to judge unless you hold down Alt as you drag. This displays a greyscale view, in which black areas are protected from sharpening, enabling you to isolate the sharpening to edge areas.

106. Reset the sliders quickly

Photoshop tips: Reset the sliders quickly

Double-click any slider to reset it to 0. If you click once, then the slider jumps to the point you're over. So if you keep the mouse still, you can single-click, thendouble-click over a point for a quick 'before and after' view of any adjustment you've made.

107. Crop ratios

Photoshop tips: Crop ratios

Square crops can help to make your images stand out from the crowd. For a list of different crop ratios, hold down the mouse button over the Crop tool. Remember, like everything else in ACR, cropping is non- destructive, so you can try out different ratios and adjust the crop at any time.

108. Exposure before colour

It's always best to adjust exposure before you move on to colour correction.

109. Adjustment brush controls

Photoshop tips: Adjustment Brush controls

The Adjustment Brush is perfect for selective toning in ACR. The brush works by setting pins, each linked to a painted mask that specifies the area you want to tweak. You'll need to view the mask when painting, and hide it when using the sliders to adjust the area. Hit Y to switch the view of the mask on or off.

110. Erase masks

When painting with the Adjustment Brush, hold down Alt to erase parts of the mask.

111. Clip the blacks

Deep blacks give an image extra punch, so it's okay to clip the blacks a little. For deep blacks, drag the Black point slider inwards while holding down Alt until a few dark spots appear.

112. Straighten horizons

Hold down A and drag a line to straighten your images.

113. Clipping views

Hold down Alt while dragging the Exposure, Blacks or Recovery slider to see any clipped pixels, or click the icons at the top right and left of the histogram to see them all the time.

114. Screen real estate

Make the most of your screen size by hitting F to switch the ACR display to Full Screen Mode.

115. 3D carousel view

Photoshop tips: 3D carousel view

Looking for Photoshop tips to view images in interesting ways? Look no further. All you need to do is hit Cmd/Ctrl+B to see your images in a snazzy 3D carousel. Scroll through the images with the left and right arrow keys and hit down to remove an image from the view.

116. Paste ACR settings

Photoshop tips: Paste ACR settings

You can copy ACR treatments from one file to another in Bridge. Right-click any file with the circular ACR icon, then go to Develop Settings>Copy Settings.Right-click another file (or hold down Cmd/Ctrl and click to select more than one) then choose Paste settings.

117. Stack similar images

Photoshop tips: Stack similar images

Stacks can help you keep your workspace tidy and easier to navigate by grouping similar images together. Select a group of files (hold down Shift and click the first and last) then go to Stacks>Group as Stack.

118. Open in ACR

Photoshop tips: Open in ACR

Raw files open automatically into ACR, but you can open JPEGs and TIFFs, too, by right-clicking them and choosing 'Open in Camera Raw', or simply hitCmd/Ctrl+R.

119. Open as layers

Photoshop tips: Open as layers

You can load a group of images into layers of a single document by going toTools> Photoshop>Load Files into Photoshop Layers.

120. Step by step: solarisation in ACR

A: Make a cone-shaped curve

Photoshop tips: Make a cone-shaped curve

Open an image in ACR, then click the Tone Curve Panel. Drag all the points off the curve to delete them, then make one single point in the middle. Drag this down, then drag the bottom left of the curve to line up to the top, making an inverted cone shape.

B: Convert to mono

Photoshop tips: Convert to mono

Click the HSL/Greyscale Panel and check 'Convert to Black and White'. Use the sliders to tweak the black and white conversion. If you want to add some colour, go to Split Toning and adjust the sliders to add colour to the shadows and highlights. One of the top mono Photoshop tips!







Post your comment


Be the first to comment